the hounch joint

  • Thread starter Thread starter rococojo
  • Start date Start date

You are reading the forum of the Society of American Period Furniture Makers — people who build and study American period furniture.

Membership brings the whole forum, the annual journal and quarterly magazine, the members’ gallery and workbench, and chapters across the country. About membership

R

rococojo

Guest
In an earlier post: 19th Jan 07, bill Sutton claimed:  I don't think there is any significant structural advantage provided by a haunch; in fact I think it could be argued that it may actually weaken the post.
Can we take it: the Post, to mean a stile. (English termination)
Well to me? either way that is bad advice.
For on a chair leg/rail joints for example, the haunch is there to? Stop the top end, of a (if Used) Ordinary mortise joint twisting, inward or outward? Causing the glue joint to fail thus needs a repair,
. By including a ¼” long haunch on the tennon, the mortise & tennon joint is connected the full width of the rail, at the joint line /same at the mortise. Making a joint that can never twist out of alignment.
The same rule applies: with a house door, a window frame, paneling, or furniture.
Remember: Haunch joints are there for a purpose, to make a stronger joint.


 

If this discussion was useful, there are twenty years of them here. Join SAPFM to take part — the forum, the journal, the magazine and the members’ gallery come with membership.

Back
Top