David Conley
Well-known member
SAPFM – ORV Chapter,
The Fall 2007 Meeting has been set for Saturday and Sunday, October 27 & 28 at Wood Werks Supply in Columbus, Ohio. Many of you have already been to the Wood Werks Store and we are also using the same hotel as before.
As usual, I will need a head count of who is planning to attend so that we can get the right amount of food.
After the Show & Tell and before the program gets started after lunch would be a good time to have another swap meet. If you have got something to sell or trade, please bring it.
Again, this meeting will be free to all SAPFM dues paying members. The proposed agenda is listed below.
Thanks,
David
SATURDAY, October 27, 2007
1. Open doors at 10:00am
Arrive, relax, have some coffee. Come early and do your shopping at Wood Werks Supply. Remember, they will only be open on Saturday morning and will close at 12:00.
2. Introductions and Show & Tell, 11:00am – 12:00pm
The “show and tell” is an ice breaker. Please bring anything you would like to show off. If you have a special piece, a project or even a jig, please bring them. For those who haven’t attended a previous meeting, this is a quick introduction, a display of your skills, interests, projects both past and present, jig, etc. It can even be a request for help in a particular area. After we go around the room, we will break for 30 min. During this break, you can seek out the other members who have similar interest and/or have already built a project/jig you want to build. This break will give you the opportunity to meet and establish a new friendship, pick their brains, and continue communicating with them after the meeting. This is extremely helpful for highly specialized niches, like inlays, marquetry, carving, Bombay chest, etc.
2a) Introductions and Show & Tell, 11:00 - 11:30am
Name, where you live, your past and present projects, classes, and/or your particular interest and your Show & Tell item if you brought one. …
2b) Break to discuss Show & Tell one-on-one, 11:30am-12:00pm
Also, we will have another swap meet. If you have got something to sell or trade, please bring it.
3. Lunch, 12:00 – 1:00pm
Lunch for Sat. will be subs or pizza.
4. Demonstrations, 1:00 – 5:00pm
4a. Sharpening
(1) Lathe Tools by Ron Damon (1-hrs)
(2) Veritas Mk II by Charles Murray (30 min)
(3) Scrapers by Charles Murray (30 min)
4b. Period Furniture Moldings by George Walker (2-hrs)
5. Dinner will be at one of the local restaurants.
SUNDAY, April 1, 2007
6. Breakfast (voluntary) , 7:30 – 8:00am
7. Demonstrations (continue), 8:30 – 12:00pm
7a. Sharpening
(1) Auger Bits by Jim Crammond (30-min)
(2) Waterstones by David Conley (1 hr)
7b. Marquetry using boule method by Dick Kammerer (2 hrs)
8. Question and Answer Period: Open Forum, 12:00 – 12:15pm
Ask the group questions about any woodworking problems you having, and let the group respond with their answers.
9. Wrap-up, 12:15 - 12:30pm
9a. Develop the agenda items for the next Chapter meeting.
DIRECTIONS TO THE WOODWERKS SUPPLY, Inc.:
1181 Claycraft Road, Columbus, Ohio 43230 Ph# (614) 575.2400
From I-270, exit #39 on the East side of Columbus, exit East onto Broad Street/OH-16 E toward NEWARK, Ohio for 0.2-miles, turn left at first light onto Taylor Station Road/CR-208 for 0.9-miles, just past Donatos Pizza Office building, turn left on Claycraft Road and park in the rear parking lot.
http://www.woodwerks.com/index.htm
HOTEL ARRANGEMENTS:
Candlewood Suites Hotel / Columbus Airport
590 Taylor Road
Gahanna, Ohio 43230
Tel: 614-863-4033 Fax: 614-863-6299
Kimberley Faye Gravley / Director of Sales
When you contact them to book your rooms mention that you are with the WoodWerks/SAPFM meeting and you will get a rate of $60 for a studio and $75.00 for a one-bedroom suite. Everyone needs to book their rooms as soon as possible.
Candlewood Suites website: so you can get an idea of what the rooms look like
http://www.ichotelsgroup.com/h/d/cw/1/en/hd/cmhap?irs=null
Directions to hotel:
Exit 37 of I-270;
Head North on S HAMILTON RD/OH-317 North toward GAHANNA for 0.5 miles.
Turn RIGHT onto MORRISON RD for 0.6 miles.
Turn LEFT onto TAYLOR RD and it should be right there.
The hotel should be visible from I-270, especially for those traveling beltway counterclockwise as the hotel is adjacent to the start of the exit lane.
Easton Town Center's website (list of restaurants):
http://www.eastontowncenter.com/maindirectories/restaurants/tableservice.cfm
The Fall 2007 Meeting has been set for Saturday and Sunday, October 27 & 28 at Wood Werks Supply in Columbus, Ohio. Many of you have already been to the Wood Werks Store and we are also using the same hotel as before.
As usual, I will need a head count of who is planning to attend so that we can get the right amount of food.
After the Show & Tell and before the program gets started after lunch would be a good time to have another swap meet. If you have got something to sell or trade, please bring it.
Again, this meeting will be free to all SAPFM dues paying members. The proposed agenda is listed below.
Thanks,
David
Society of American Period Furniture Makers
Ohio River Valley Chapter
Proposed AGENDA
Ohio River Valley Chapter
Proposed AGENDA
SATURDAY, October 27, 2007
1. Open doors at 10:00am
Arrive, relax, have some coffee. Come early and do your shopping at Wood Werks Supply. Remember, they will only be open on Saturday morning and will close at 12:00.
2. Introductions and Show & Tell, 11:00am – 12:00pm
The “show and tell” is an ice breaker. Please bring anything you would like to show off. If you have a special piece, a project or even a jig, please bring them. For those who haven’t attended a previous meeting, this is a quick introduction, a display of your skills, interests, projects both past and present, jig, etc. It can even be a request for help in a particular area. After we go around the room, we will break for 30 min. During this break, you can seek out the other members who have similar interest and/or have already built a project/jig you want to build. This break will give you the opportunity to meet and establish a new friendship, pick their brains, and continue communicating with them after the meeting. This is extremely helpful for highly specialized niches, like inlays, marquetry, carving, Bombay chest, etc.
2a) Introductions and Show & Tell, 11:00 - 11:30am
Name, where you live, your past and present projects, classes, and/or your particular interest and your Show & Tell item if you brought one. …
2b) Break to discuss Show & Tell one-on-one, 11:30am-12:00pm
Also, we will have another swap meet. If you have got something to sell or trade, please bring it.
3. Lunch, 12:00 – 1:00pm
Lunch for Sat. will be subs or pizza.
4. Demonstrations, 1:00 – 5:00pm
4a. Sharpening
(1) Lathe Tools by Ron Damon (1-hrs)
(2) Veritas Mk II by Charles Murray (30 min)
(3) Scrapers by Charles Murray (30 min)
4b. Period Furniture Moldings by George Walker (2-hrs)
5. Dinner will be at one of the local restaurants.
SUNDAY, April 1, 2007
6. Breakfast (voluntary) , 7:30 – 8:00am
7. Demonstrations (continue), 8:30 – 12:00pm
7a. Sharpening
(1) Auger Bits by Jim Crammond (30-min)
(2) Waterstones by David Conley (1 hr)
7b. Marquetry using boule method by Dick Kammerer (2 hrs)
8. Question and Answer Period: Open Forum, 12:00 – 12:15pm
Ask the group questions about any woodworking problems you having, and let the group respond with their answers.
9. Wrap-up, 12:15 - 12:30pm
9a. Develop the agenda items for the next Chapter meeting.
DIRECTIONS TO THE WOODWERKS SUPPLY, Inc.:
1181 Claycraft Road, Columbus, Ohio 43230 Ph# (614) 575.2400
From I-270, exit #39 on the East side of Columbus, exit East onto Broad Street/OH-16 E toward NEWARK, Ohio for 0.2-miles, turn left at first light onto Taylor Station Road/CR-208 for 0.9-miles, just past Donatos Pizza Office building, turn left on Claycraft Road and park in the rear parking lot.
http://www.woodwerks.com/index.htm
HOTEL ARRANGEMENTS:
Candlewood Suites Hotel / Columbus Airport
590 Taylor Road
Gahanna, Ohio 43230
Tel: 614-863-4033 Fax: 614-863-6299
Kimberley Faye Gravley / Director of Sales
When you contact them to book your rooms mention that you are with the WoodWerks/SAPFM meeting and you will get a rate of $60 for a studio and $75.00 for a one-bedroom suite. Everyone needs to book their rooms as soon as possible.
Candlewood Suites website: so you can get an idea of what the rooms look like
http://www.ichotelsgroup.com/h/d/cw/1/en/hd/cmhap?irs=null
Directions to hotel:
Exit 37 of I-270;
Head North on S HAMILTON RD/OH-317 North toward GAHANNA for 0.5 miles.
Turn RIGHT onto MORRISON RD for 0.6 miles.
Turn LEFT onto TAYLOR RD and it should be right there.
The hotel should be visible from I-270, especially for those traveling beltway counterclockwise as the hotel is adjacent to the start of the exit lane.
Easton Town Center's website (list of restaurants):
http://www.eastontowncenter.com/maindirectories/restaurants/tableservice.cfm